Featured Products

home | contact
telephone:1.604.271.1150

Winter Featured Products

Packsack Drill

Capacity EW aluminum drill rods 50ft (15m) IEWS core 0.995 in (25.2 mm) diameter.

Capacity AW aluminum drill rods 35ft (10m) IAWS core 1.385 in (35.1 mm) diameter.

Torque 10ft lb (14Nm)

Engine 6.5hp (4.8 kw) 4 cycle single cylinder air cooled gasoline engine with auxiliary fuel tank.

Transmission 3 to 1 reduction with built-in water swivel

Weight Drill Unit 34lb (15.8kg)

Pionjar Drill

Breaking, cutting and drilling capabilities

Gas driven - no need for cables, power packs, hoses, or compressors

Easy to use, maintain and service

Cuts capital, running, transport and storage costs

Powered by a single-cylinder air-cooled two-stroke engine

Drills at a rate of 10-12 in./min. with a 1.3 in. bit

Weighs 59 lbs., making it easy to transport

Cobra Combi

break concrete

cut asphalt

drill

dig

split rocks

drive posts and fences

drive rods and spikes

tamp and compact soil

tamp ballast/ties

Winkie Drill

Gasoline 2 cycle air cooled 10hp engine (@ 400rpm).

Oil bath gear shift transmission. Unipress hand feed, centrifugal clutch.

Maximum bit speed 1200 to 2800 rpm.

Weight : Drill 85lbs Feed 100lbs.

Print This Page

Packsack Drill Capacity EW aluminum drill rods 50ft (15m) IEWS core 0.995 in (25.2 mm) diameter. Capacity AW aluminum drill rods 35ft (10m) IAWS core 1.385 in (35.1 mm) diameter. Torque 10ft lb (14Nm) Engine 6.5hp (4.8 kw) 4 cycle single cylinder air cooled gasoline engine with auxiliary fuel tank. Transmission 3 to 1 reduction with built-in water swivel Weight Drill Unit 34lb (15.8kg)
Pionjar Drill Breaking, cutting and drilling capabilities Gas driven - no need for cables, power packs, hoses, or compressors Easy to use, maintain and service Cuts capital, running, transport and storage costs Powered by a single-cylinder air-cooled two-stroke engine Drills at a rate of 10-12 in./min. with a 1.3 in. bit Weighs 59 lbs., making it easy to transport
Cobra Combi break concrete cut asphalt drill dig split rocks drive posts and fences drive rods and spikes tamp and compact soil tamp ballast/ties
Winkie Drill Gasoline 2 cycle air cooled 10hp engine (@ 400rpm). Oil bath gear shift transmission. Unipress hand feed, centrifugal clutch. Maximum bit speed 1200 to 2800 rpm. Weight : Drill 85lbs Feed 100lbs.