Toll Free: 1-866-999-1123
You are Here » Home » Mining Equipment » Drills and Carriers » Winkie Drill

Winkie Drill

Winkie Drill
Winkie Drill

JKS Winkie Drill

Two men can carry a Winkie Drill and the unit can be helicoptered into remote drill sites.
Vary Drilling Speed, a 2 speed transmission maximizes drilling speed.
Unipress frame enables steady feed pressure with minimum exertion.
Minimize change time & operator fatigue with a Winkie Tripod & Winch
Aluminum Drill Rods are light and easier to transport and to hoist.
 

Specifications:

  • Gasoline 2 cycle air cooled 10hp engine @ 400rpm. 
  • Oil bath gear shift transmission.
  • Unipress hand feed, centrifugal clutch.
  • Maximum bit speed 1200 to 2800 rpm.
  • Weight : Drill 85lbs  Feed 100lbs.

Hole Depth Core Size:

  • Core Barrel: E-core Thin kerf IAWS
  • Core Diameter 0.995" (25.2 mm)
  • Hole Diameter 1.485" (37 mm)
  • Depth: 450-500 ft (135-150 m)

Hole Depth Core Size:

  • Core Barrel: A-core Thin kerf IAWS 
  • Core Diameter 1.385" (35.1 mm)
  • Hole Diameter 1.89" (48mm)
  • Depth: 350-400 ft (105-120 m

Reconditioned drills are built from good quality used drills, thoroughly examined to ensure housings are not damaged or worn.  Worn working parts are replaced with special attention to gears. 

Download Brochure

Copyright © 2013. Canyon Equipment Inc.
Website Development and Design by NetClimber Web Design.