Toll Free: 1-866-999-1123
Dusty_rock
You are Here » Home » Rock Drilling » Dust Control System

Dust Control System

Hydro-Jet Dust Suppression

Canyon Equipment can supply water dust suppression systems for DTH and top hammer rock drills. 

Air and water are used in low pressure to mitigate dust using a boot around the drill steel. The dust eliminator for rock drills which, thanks to a patented device, collects the dust and mixes it with water, expelling the mixture created by means of a pipe laterally away from the working area. This is a very useful accessory for hand held rock-drills or mounted drills.

Dust Suppression Systems help working conditions and safety on the site as well as safeguarding the health of workers.

Tornado Dust Vacuum System

The tornado system is an air driven vacuum system that can be mounted on equipment or set up free-standing and will pull the dust away from the work area and deposit into a bag; no water is used.  Available for both DTH and top hammer drilling systems.

Dust Suppression Systems help working conditions and safety on the site as well as safeguarding the health of workers.

Its high permeability improves its filtering effectiveness and allows easy cleaning by blowing-out with compressed air.

Filtering surface 

5m2

Suction 

5m3/min

Air consumption 

0.3 ÷ 1m3/min

Recommended operating pressure

6 ÷ 7 bar

Weight 

30kg (67lbs)

Filter cleaning

Self-cleaning cartridge

Product Listing:

Copyright © 2013. Canyon Equipment Inc.
Website Development and Design by NetClimber Web Design.