Toll Free: 1-866-999-1123
You are Here » Home » Rock Drilling » Slope Stabilization & Rock Drilling

Slope Stabilization & Rock Drilling

Canyon Equipment supplies Marini DTH hammers, various sizes of rock drills, drill feeds and carriers and rock bolting equipment for all applications in the slope stabilization and demolition industries.

The MINI-MIDI-BIG-MAST are drilling feeds to be used with mini excavators. They can be equipped with pneumatic or hydraulic rotation heads (for DTH use) or with a pneumatic top hammer. The feed can be equipped with single or dual hydraulic turn tables, allowing for multi positional drilling.

Marini DTH Drill System
Customer Feedback

This drill has been the cats ass for us. We are operating in a variety of harsh conditions.  We are on working at elevations up to 7800ft in humid coastal conditions.  We are using a 4" hammer and 120mm bit drilling 0 degrees, straight up and down holes.  Our hole depth for this job has been 7.5m and in the past 3 weeks we have drilled 120m. We are using a striped Sulair HP210 for our compressor.  It currently weights 1500lbs and puts out 160psi and 210cfm. 

Over all this thing is dead simple and easy to operate and set up.  We will be considering 2-3 more next season.  We would like more info on casing systems for overburden as also dust/chip collector systems.

Axis Mountain Technical

DTH Drill: heli portable, remote access
Click here to see the New and Exciting MUST SEE VIDEO on DTH rope access drilling.
Copyright © 2013. Canyon Equipment Inc.
Website Development and Design by NetClimber Web Design.